Baratza Encore ESP Pro vs DF Grinders DF64 Gen 2
Technical comparison · Espresso grinders
Choose Baratza Encore ESP Pro if you are looking for an intermediate-level grinder with 40 mm conical burrs, ideal for small spaces thanks to its reduced weight. Choose DF Grinders DF64 Gen 2 if you prefer an advanced model with 64 mm flat burrs and a more powerful motor, also suitable for French press.
| Parameter |
Encore ESP Pro
Baratza
F2 · Intermediate
|
DF64 Gen 2
DF Grinders
F3 · Advanced
|
|---|---|---|
| Identity | ||
| Use tier | F2 — Intermediate | F3 — Advanced |
| Price | ||
| Price (€) | 279.95 € | ~450–1000 € |
| Price updated on | 09/2026 | 09/2026 |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | 13 × 15 × 34 cm | 13 × 22.5 × 30 cm |
| Weight (kg) | 3.08 kg | 6.8 kg |
| Power (W) | 130 W | 250 W |
| Voltage (V) | 220 V | 110 V |
| Category specs | ||
| Burr type | Conical | Flat |
| Burr diameter (mm) | 40 mm | 64 mm |
| Single dose | Yes | Yes |
| Supported brew methods | Espresso, Pour over | Espresso, Pour over, French press |
| Adjustment type | Stepless | Micrometric |
| Burr material | — | Stainless steel |
| Drive | Electric | Electric |
| Motor speed (rpm) | 550 rpm | 1400 rpm |
| Hopper capacity (g) | 200 g | 50 g |
The differences that matter
- Burrs: Baratza uses 40 mm conical burrs, while DF64 Gen 2 employs 64 mm stainless steel flat burrs.
- Motor: DF64 Gen 2 offers 250 W of power at 1400 rpm, compared to 130 W at 550 rpm for the Baratza.
- Hopper: Baratza has a 200 g hopper, whereas DF Grinders features a 50 g capacity for single doses.
- Brewing methods: Both are suitable for espresso and pour over, but the DF64 Gen 2 also covers French press.
- Dimensions and weight: DF64 Gen 2 weighs 6.8 kg with a depth of 22.5 cm; Baratza weighs 3.08 kg and is 15 cm deep.
Which one to choose
Choose Encore ESP Pro if…
Choose Baratza Encore ESP Pro if you want a lighter (3.08 kg) and less deep device, featuring a large 200 g hopper and a low-RPM motor (550 rpm) for espresso and pour over.
Choose DF64 Gen 2 if…
Choose DF Grinders DF64 Gen 2 if you need an advanced grinder (F3 tier) with 64 mm stainless steel flat burrs, micrometric adjustment, and a more powerful motor (250 W at 1400 rpm) capable of covering French press as well.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
Questo confronto rimanda alle due schede, dove trovi i dati completi e i link ufficiali.